egr valve replacement?

You are wasting your thinking powers. Most EGR valves are easy to remove, and EASIER to just clean out with solvent. This will usually restore proper functioning. The reason they clog up is from a dirty IDLE AIR CONTROL VALVE, which causes fuel mixture to be too rich. THe excess carbon made then clogs up the EGR valve. CLEAN everything out, then install a set of Bosch Fusion, or DENSO Twin TIp spark plugs. These simply perform better, give more power, reduce carbon and exhaust emissions. and improve overall performance of EVERY engine controller! Throw the AC plugs in the trash where they belong!

what approximately it? are you particular you would be able to desire to repalce the valve itself. they are in a place to be run via a sensor and vacuum traces or if old sufficient as yours would desire to be basically vacuum traces. be sure your vacuum traces are stable, without holes....

what approximately it? are you specific you'll be able to desire to repalce the valve itself. they could be run with the help of a sensor and vacuum traces or if sufficiently previous as yours could be basically vacuum traces. make sure your vacuum traces are good, with out holes....

Why would it. They are from different cars, with different engines.